CIPPE 2019 just ended on Mar. 29th. GN Solids Control got great success, thousands of oil and gas professionals and visitors came to GN booth. GN Solids Control would like to give our sincere thanks for all visitors. We are looking forward to have a further and deeper conversation with some customers in GN manufacturing plant shortly.
This year, GN Solids Control exhibited one whole Oil Sludge Treating System. Many visitors came to check this oil sludge treating system and showed great interests. GN Oil Sludge Treating system can be used to treat oil sludge from drilling rig site, sludge from refinery plant as well as oil tank bottom sludge.
The smallest GN oil sludge treating system was exhibited in this show. Treating flow rate is 1~2 m3/h. GN also provides 5m3/h and 15m3/h treating system. After treated by GN oil sludge treating system, oil on the final cuttings is less than 5%. Most of the oil can be recovered, water in the final oil is just around 2~3 percent after treated by GN 3 phase disc-centrifuge. For further treating, those oil cuttings can be treated by TDU or bio-chemical method.
Besides GN oil sludge treating system, GN Solids Control also exhibited vacuum pump which also draws great attention. GN vacuum pump is an air driven transfer pump. Large density or viscosity oil sludge can be transfer by GN vacuum pump. GN Solids Control provides 3 different models, which include 40m3/h, 20m3/h and 10m3/h.
Every year, GN Solids Control is trying to provide the most advanced technology to all solids control and waste management systems or equipment. GN Solids Control also exhibited shale shaker, decanter centrifuge, cuttings dryers and screw conveyors as well as centrifugal pumps. Many different types of shaker screens are also exhibited in this show.
Next show GN will participate is Houston OTC show, welcome to visit us again!

CIPPE is coming right the next week! We, GN Solids Control would like to give our sincere invitations to global customers.
As we all know, CIPPE is one of the world largest oil and gas shows in the world. Every year, CIPPE will have one show in Beijing and one show in Shanghai. GN Solids Control has been participating in these shows for many years.
This year GN Solids Control will exhibit the following equipment, welcome to visit our booth in Beijing New Exhibition Center.
1.GN Oil Sludge Treating Unit
GN oil sludge treating unit is a turnkey solution for oil sludge treatment, it includes: premixing-heating tank, shale shaker, decanter centrifuge, 3 phase disc-centrifuge, chemical dosing unit and some other auxiliary part.

2.GN Shale Shaker
GN shale shaker is one of the most popular treating equipment in the world. Shaker is largely used to treating solids and liquid mixed slurry.
3.GN Decanter Centrifuge
Another pop star equipment of GN, GN decanter centrifuge are largely used by global customers. Now GN Solids Control provides different centrifuges that can be used in oil and gas area and some other solids and liquid separation area. GN decanter centrifuges are also used in hydro vac slurry treating, mining slurry treating, HDD mud treating etc.

4.GN Centrifugal Pump
GN made centrifugal pumps are totally replaceable with NOV mission magnum pumps. Centrifugal pump is one effective transfer pump. GN Solids Control use a lot of centrifugal pumps to feed mud cleaners.

5.GN Shaker Screens
GN Solids Control manufactures thousands of shaker screens every year, which can be used to replace world famous brand shaker screens such as Mongoose shaker screens, Derrick shaker screens, FSI shaker screens, NOV Venom or King Cobra Shaker screens.
BTW, OTC show will be exhibited in May. Welcome to visit us in Houston. Both GN Solid Control and GN Solids America LLC has one booth.

GN Solids Control manufactures different types of feeding pumps, such as centrifugal pump, submersible pump, screw pump, vacuum pump etc. All GN made pumps can be used to transfer solids and liquid.
GN Solids Control made centrifugal pumps are largely used to transfer solids and liquid, every year GN manufactures over 1000 centrifugal pumps that are using in more than 70 countries and regions. GN made centrifugal pumps are totally interchangeable with Mission Magnum pumps, many USA pump manufacturers are using GN pump parts to repair the OEM magnum pumps.
GN centrifugal pumps can be used as feeding pumps for desander or desilter. Drilling mud can be also used to transfer by centrifugal pumps between different mud tanks. As GN centrifugal pump is a wearable parts, GN Solids Control engineers use mechanical seal made with tungsten carbide. Besides, a packing seal is also used. GN centrifugal pump’s impeller is designed to use pretty low axial trust loads, this particular design is convenient for installation, maintenance and repair.
Besides the above mentioned advantages, here are more factors when you choose a good centrifugal pump:
1.GN centrifugal pump is using concentric design to minimize abrasive wear and lower the turbulence. In order to have longer using life, GN centrifugal pumps are using strong concentric and thick casing.
2.GN centrifugal pump casing is made from hard ductil iron alloy. This material can upgrade the abrasion-proof capability.
3.GN centrifugal pump is designed to have a wide open-vane impeller which helps to low the axial thrust, so bearing life can be extended.
4.In case of the improper motor hook-up, GN used anti-loosening impeller lock bolt.
5.Mechanical seal is high quality brand no-adjustment type, it provides long using life and zero leakage. Shaft sleeve is replaceable.
6.GN Solids only used op brands bearings.
7.By using casting method to manufacture the centrifugal pump skid, GN Soilds Control makes sure te centrifugal pump has less vibration and reliable operation.

GN Solids Control shipped multiple sets shakers and decanter centrifuges to a Indian customer last month. As a global solids control and waste management system provider, GN Solids Control has provided millions of treating equipment and turnkey solutions to thousands of customers.
GN Solids America LLC is a branch company of GN Solids Control, it was established in 2013 in Houston, TX, USA. With the opening of GN Solids America, GN Solids Control is able to stock thousands of shaker screens, tens of shakers and centrifuges in Houston. All the shale shakers, decanter centrifuges, centrifugal pumps and shake screens can be delivered to customer in a short time. For this Indian customer, GN Solids Control provided 6 sets shale shakers and 2 decanter centrifuges.
1.GN Shale Shaker
6 sets GN shale shakers are using GN 4 panel screens shaker, use same size of Mi-Swaco Mongoose screens. GN shakers are designed under fully stress analysis. GN shakers are using USA Martin vibrators or Italy OLI vibrators. Usually 2 sets shale shakers are distributed by a box feeding box or pipe feeding box.
GN Solids Control also manufactures shaker screens, mainly composite frame screens. GN shaker screens cover most of the popular size shaker screens, they can be used to replace Derrick shaker screen, Venom screen, king cobra screen, FSI screen and Mongoose screen etc.
2.GN Centrifuge
2 sets GN decanter centrifuge systems are provided together with those shale shakers. Each decanter centrifuge is fixed on the top of the centrifuge skid with a screw pump and VFD control box on the skid.
GN decanter centrifuge is the most cost-effective treating centrifuge in the world. Bearing temperature and vibration switch are optional. GN centrifuge rotating bowl is made by centrifugal casting. GN screw propeller also protected with tiles made of tungsten carbide.
Welcome to visit GN Houston office to check GN shale shakers and centrifuges.